Exact starting settings for your first print with each material. Skip the guesswork.
| Setting | PLA | PETG | TPU 95A |
|---|---|---|---|
| Nozzle Temp | 210°C | 240°C | 230°C |
| Bed Temp | 55°C | 75°C | 50°C |
| Layer Height | 0.2mm | 0.2mm | 0.2mm |
| Infill | 20% | 20% | 30% |
| Speed | 60 mm/s | 50 mm/s | 20 mm/s |
| Retraction | 2mm @ 40mm/s | 3mm @ 30mm/s | disabled |