Fillamentum
Czech Premium Filament Renowned for Unmatched Color Vibrancy
About Fillamentum
Fillamentum is a Czech filament manufacturer that has built a cult following among discerning makers, primarily for one reason: color. The brand's PLA lineup features some of the most vibrant, saturated, and unique colors available in consumer 3D printing — from the famous 'Traffic Red' to subtle pastels, metallics, and translucent variants. If you want a specific shade that no other brand offers, Fillamentum probably has it.
But Fillamentum is more than just pretty colors. The company produces a comprehensive range of engineering materials including PETG, ABS, ASA, Nylon, Polycarbonate, and flexible filaments. The ExtraFill series offers enhanced mechanical properties, while the Industrial Fill line targets professional and industrial users. All filaments are manufactured in the Czech Republic with tight quality control, and the company publishes a pocket printing guide with recommended settings for every material.
The PETG line is particularly noteworthy, with separate settings for glossy and matte finishes. Glossy PETG runs at 255–285 °C for high-speed printers, while the matte variant runs cooler at 235–255 °C. Fillamentum's ABS prints at 245–280 °C with a 90–110 °C bed. The brand is priced in the premium tier (~$30–45/kg), and availability in North America is primarily through resellers rather than direct Amazon listings. For makers who prioritize color accuracy and material variety over lowest cost, Fillamentum is a top-tier choice.
Key Filament Specifications
| Material | Nozzle Temp | Bed Temp | Tensile (MPa) | HDT (°C) | Key Notes |
|---|---|---|---|---|---|
| PLA | 200–220 °C | 50–60 °C | 45 ± 5 | 55 ± 5 | Famous for unmatched color vibrancy and unique shades. ±0.02 mm tolerance. Good bed adhesion, minimal warping. Crystal PLA variant offers translucency and bendability. Best for aesthetic models, cosplay, and display pieces. |
| PETG | 235–255 °C | 65–75 °C | 48 ± 6 | 72 ± 5 | Glossy finish: 255–285 °C for high-speed. Matte finish: 235–255 °C. Cooling fan 0–30% (more cooling can cause poor layer adhesion). Speed 40–60 mm/s. Dry before use for best results. |
| ABS | 245–280 °C | 90–110 °C | 40 ± 5 | 95 ± 5 | High strength and heat resistance. Enclosure required. Print speed 30–50 mm/s, cooling fan 0–20%. Acetone smoothing compatible. Ventilate fumes. ExtraFill ABS variant offers improved layer adhesion. |
| TPU 98A | 220–240 °C | 40–60 °C | 35 ± 5 | 50 ± 5 | Shore 98A flexible filament. Print speed 20–40 mm/s. Direct drive extruder strongly recommended. Good elasticity and abrasion resistance. For seals, gaskets, hinges, and flexible functional parts. |
All values sourced from Fillamentum official pocket printing guide (fillamentum.com) and technical data sheets. Standard 1.75 mm diameter, ±0.02 mm tolerance, 1 kg spool, vacuum-sealed with desiccant across all lines.